Skip to content

Polycarb / Fibreglass & Twin Wall : SolaSafe Range

Level 1

CORRUGATED – Colours
Clear, Opal, Grey, Light Bronze, Smooth Cream, Dark Tint.

GRECA – Colours
Clear, Opal, Grey, Light Bronze, Smooth Cream, Dark Tint.

5 RIB – Colours
Clear, Opal, Grey, Light Bronze, Dark Tint.
See colour chart, shade factors, light and heat transmission.

Sheet cover 760mm.
See table of sheet lengths.

Level One – SolaSafe Range

The most widely used Solasafe polycarbonate sheet. Six colours with varying light and heat transmission.

Key: 0=Full Light  | 10 = Full Shade

Solasafe Range - Clear

CLEAR
Shade Factor 1
Light Transmission 91%
Heat Transmission 85.2%

Solasafe Range - Bronze

LT. BRONZE
Shade Factor 3
Light Transmission 36%
Heat Transmission 60.6%

Solasafe Range - Grey

GREY
Shade Factor 5
Light Transmission 26%
Heat Transmission 50%

Solasafe Range - Opal

OPAL
Shade Factor 7
Light Transmission 55%
Heat Transmission 40.2%

Solasafe Range - Dark Tint

DARK TINT
Shade Factor 7
Light Transmission 17%
Heat Transmission 38.9%

Solasafe Range - Smooth Cream

SMOOTH CREAM
Shade Factor 7
Light Transmission 44%
Heat Transmission 35.2%

Temperatures in direct sunlight are greater than the temperatures given in weather reports. The shade factors shown provide an indication of the heat absorbed or reflected by the SolaSafe sheet.

Level Two – SolaFrost Range

The SolaFrost range. Low transmitted heat, softer light, more comfort.

Key: 0=Full Light  | 10 = Full Shade

Solasafe Range - Clear

CLEAR
Shade Factor 2
Light Transmission 91%
Heat Transmission 85.2%

Solasafe Range - Grey

GREY
Shade Factor 7
Light Transmission 91%
Heat Transmission 85.2%

Ampelite SolaFrost will significantly reduce the amount of direct sunlight and glare when compared with standard polycarbonate sheeting. This in turn greatly enhances comfort of your outdoor area.

Unlike Level 1 Standard polycarbonate transparent sheeting, Zammit Roofing SolaFrost is a translucent (diffused) polycarbonate product.

This greatly enhances outdoor comfort.

  • Translucency = Heat and glare reductions.
  • Transparency = Some heat and glare.
  • Matt texture helps eliminate expansion noise unlike standard polycarbonate sheeting.

Level Three – HR1 Range

Solasafe HR1 Heat reducing sheeting. Especially suitable in hot climates.

Key: 0=Full Light  | 10 = Full Shade

Solasafe Range - Clear

PEARL ICE
Shade Factor 6
Light Transmission 87%
Heat Transmission 85.2%

Solasafe Range - Silver Mist

SILVER MIST
Shade Factor 7
Light Transmission 27%
Heat Transmission 49.87%

Level Three Solasafe HR1 has a metallic finish that reflects the heat and gives soft diffused light.

Light transmission of all colours and grades is determined in accordance with AS/NZS 4257.4. The colour representations of Solasafe polycarbonate above are as accurate as the nature of the material and commercial photographic and printing processes allow. It is probable that colour tints may vary between those shown in this brochure.

More Products from Zammit Pergola Range

Back To Top