Phone. (02) 9675 5622
Fax. (02) 9675 5644

KLIP-LOK MAXIMA®

 

Klip Lok

Colours

Bushland

Bushland

Classic Cream

Classic Cream

Cottage Green

Cottage Green

Deep Ocean

Deep Ocean

Dunev

Dune

Evening Haze

Evening Haze

Headland

Headland

Ironestone

Ironestone

Jasper

Jasper

Loft

Loft

Manor Red

Manor Red

Monument

Monument

Pal Eucalypt

Pal Eucalypt

Paperbark

Paperbark

sandbank

Sandbank

Shale Grey

Shale Grey

Surfmist

Surfmist

Wilderness

Wilderness

Windspray

Windspray

Woodland Grey

Woodland Grey

Product Description and Features

KLIP-LOK MAXIMA® is a wide cover concealed fixed cladding. It has extra wide 770mm coverage with excellent performance. It features strong ribs rising from flat pans. Because of the ease of installation and the extra economy 770mm wide cover brings, you get outstanding value.

  • 770mm wide cover width makes it very economical
  • Extra strong and lightweight
  • It can be fixed quickly and easily, no special tools required
  • Long straight runs are possible because thermal expansion is able to slide along the clips
  • Concealed fixed, so long straight lines remain clean and smooth

Note

      • Available in Western Australia only
      • Minimum recommended roof pitch is 2 degrees (0.42mm BMT)
      • Minimum recommended roof pitch is 1 degree (0.48 and 0.60mm BMT)

          Span Table

          The maximum recommended support spacings are based on testing in accordance with AS1562.1-1992, AS4040.1-1992 and AS4040.2-1992. Supports must not be less than 1mm BMT.

          Roof spans consider both resistance to wind pressure and light roof traffic (traffic arising from incidental maintenance).

          Wall spans consider resistance to wind pressure only.

          The figures relate only to buildings 10m or less in height and located in sheltered or exposed suburban areas or sheltered rural areas only

          Maximum Support Spacings (mm)
          Type of Span Thickness (mm) BMT
          0.42 0.48 0.60
          Roof
          Single Span - - 2200
          End Span 1400 1800 2600
          Internal Span 2200 2800 3600
          Walls
          Single Span 1900 2100 2400
          End Span 2000 2400 3200
          Internal Span 2900 3300 3900
                • For roofs, the data are based on foot-traffic loading.
                • For walls, the data are based on presures.
                • Above table is based on supports of 1mm BMT.
                • Spacing is based on one concealed clip per sheet per support.

                      Specification

                      Lengths

                      Mobile rollformed sheets are custom cut on-site. Factory sheets cut to order.

                      Tolerance

                      Length: +0 mm, -15 mm
                      Width: +2 mm, -2 mm

                      Material Specification

                      • ZINCALUME® steel made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass)
                      • COLORBOND® prepainted steel complying with AS/NZS 2728:Type 4, is made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass) or AZ200 (200g/m2 minimum coating mass), or
                      • COLORBOND® prepainted steel complying with AS/NZS 2728:Type 6, is made from stainless steel complying with JIS G 4305, Grade 430 stainless steel, 430SS550. Subject to enquiry,
                      • The base metal thickness is 0.42mm, 0.48mm or 0.60mm

                        Physical Properties

                        BMT Material kg/m kg/m2 m2/t
                        0.42 ZINCALUME® 3.26 4.23 236
                        0.42 COLORBOND® 3.34 4.34 231
                        0.48 ZINCALUME® 3.70 5.81 208
                        0.48 COLORBOND® 3.78 4.91 204
                        0.60 ZINCALUME® 4.59 5.96 168
                        0.60 COLORBOND® 4.67 6.06 165

                        Schematic

                        KLIPLOK MAXIMA

                        Availablibity

                        NSW/ACT VIC TAS QLD NT SA WA
                        Not Avail. Not Avail. Not Avail. Not Avail. Not Avail. Not Avail. Avail.