Product Description and Features
ROOFTRAK® is a safe, stable, slip resistant walkway system for incidental access to roof-mounted equipment and services. It is laid on top of steel roofing with brackets designed for application to various roof cladding profiles.
- Can be laid parallel or 90 degrees to the ribs of roofing sheets
- Simple to install
- Corrosion resistant
- Flexible in layout
- Light for easy handling
- Anti-skid, self draining surface
Lengths and Tolerance
Stock lengths: 3018mm and 6075mm; +0mm, -6mm
Depth: +1mm, -1mm
Width: +0mm, -2mm
The planks of ROOFTRAK® are made from galvanised BlueScope Lysaght ZINCFORM® steel conforming to AS1397-2001, grade G300, Z450 (300MPa minimum yield stress, 450g/m² minimum coating mass), with a base metal thickness of 1.2 mm (2.0 mm is subject to enquiry).
ROOFTRAK® walkways may be used in cyclonic and non-cyclonic areas. For use in cyclonic areas the roof cladding must also be fixed in accordance with our Cyclonic area design manual for steel roofing and walling.
Australian Standard 1657-1992 allows a maximum slope of 20 degrees along cleated or grated walkways. For ROOFTRAK® installed at 90 degrees to the ribs, the side slope (pitch of roof) should not exceed 5 degrees.
The roof supporting ROOFTRAK® must be verified to have sufficient capacity to withstand all the additional loads.
For ROOFTRAK® 450 applications, approval from regulatory authorities must be obtained as it is narrower than the minimum provided for in AS 1657-1992.
ROOFTRAK® can be used with a range of claddings. When used with KLIP-LOK 700 HI-STRENGTH® and oriented in the same direction as the cladding, an additional stiffening plate must be included.
ROOFTRAK® is supplied in kits that include components and fixings. The basic ROOFTRAK® “plank” is 224mm wide. The ROOFTRAK® 450 system uses two planks (total 450mm wide); ROOFTRAK® 675 uses three planks (total 675mm wide). For further details of the kits available.